New Customers get £5 with Promo Code
NipNip mechanic working on a bicycle wheel in the workshop
Blog

Bike Gears Slipping? Causes, Repair Costs & When to Stop Riding

Bike gears slipping when you pedal hard? Understand likely causes, when to stop riding and London repair prices from £19 labour, plus free courtesy bikes.

You push away from the lights, put a bit of power through the pedals and... clunk. Your foot drops, the bike hesitates and your confidence goes with it.

If your bike gears are slipping, the problem could be a gear adjustment, a worn chain and cassette, or another drivetrain fault. The important bit is working out which before paying for parts you do not need, or riding a bike that lets you down in traffic.

The short answer: gears that jump between cogs can point to an adjustment or alignment problem. A chain that skips when you pedal hard can point to wear. Neither symptom proves the diagnosis on its own. NipNip's published gear-adjustment labour is £19 for a single adjustment or £33 for both, with parts extra where needed and prices varying by location.

If the bike loses drive unexpectedly, stop riding and arrange an inspection. Book a gear repair assessment, or read on to understand what your bike may be telling you.

Is it the gears slipping, or the chain skipping?

People use these phrases interchangeably, but they can describe different problems.

Gears jumping: the chain changes to a neighbouring cog without you asking, hesitates after a shift, or chatters between two gears. The mechanic may need to check the gear adjustment, cable condition and derailleur alignment.

Chain skipping: you stay in the same gear, but the pedals suddenly lurch forward when you apply pressure. Worn drivetrain parts are one possible explanation, although the chain, alignment and hub also need checking.

Loss of drive: the pedals turn but the wheel does not reliably receive the effort. That needs investigation beyond simply turning a gear-adjustment screw.

You do not need to identify the faulty part before contacting us. Tell us what you felt, when it happened and whether anything recently changed.

Why do bike gears slip when pedalling hard?

1. A worn chain or cassette

The chain and the cassette, the group of cogs on your rear wheel, work together to transfer your effort. As chain components wear, the chain can stop meshing properly with those cogs.

Park Tool explains that internal chain wear can cause poor engagement, slipping under load and premature wear to other drivetrain parts. What riders call a "stretched chain" is wear inside its moving joints, rather than the metal simply being pulled longer.

The clue may be a skip when accelerating or climbing, especially in a gear you use frequently. A mechanic can measure chain wear and inspect the cassette and chainrings. A worn drivetrain cannot always be rescued by a gear adjustment.

2. Gear adjustment or cable trouble

If shifting is slow, noisy or unpredictable, the mechanism may not be placing the chain cleanly on the selected cog. Cable condition and gear adjustment are possible causes on cable-operated systems.

This is why "my gears are slipping" does not automatically mean "I need a new cassette". The right starting point is an inspection, not a shopping list.

Electronic gears have different checks. Tell us which system you have, if you know it, rather than assuming cable adjustment applies to every bike.

3. Alignment after a knock

A derailleur is the mechanism that moves the chain between gears. Its mounting point, often a replaceable hanger, needs to be correctly aligned.

If the bike has fallen over, been knocked in a rack or had a recent transport mishap, mention it. Alignment can affect shifting even when nothing looks dramatically bent.

Do not try to bend parts back by eye. If the mechanism appears damaged or close to the spokes, stop using the bike and have it checked.

4. A chain or component problem after recent work

Did the slipping start immediately after a chain replacement, wheel removal or another repair? That timing is useful information.

Compatibility, chain condition, installation and wear elsewhere in the drivetrain all matter. A new chain does not automatically mean the cassette and chainrings are healthy. Equally, recent work does not prove that the repair caused the problem.

Tell the mechanic what changed and bring any details of the parts fitted. It makes the investigation more focused.

5. A rear-hub or internal-gear fault

Not every loss of drive happens at the visible gears. The rear hub contains the mechanism that lets your bike coast and then engage when you pedal. Some bikes also put their gears inside the hub.

If the pedals suddenly move without dependable drive, the mechanic may need to investigate that system too. Do not assume a standard derailleur adjustment will solve an internal-hub issue.

Is it safe to ride with slipping gears?

Unexpected loss of drive is a reason to stop riding, not a reason to pedal harder and see what happens. A sudden slip can upset your balance, particularly when standing on the pedals or pulling away.

Stop and arrange an inspection if:

  • The pedals lurch or the bike repeatedly loses drive.
  • The chain comes off or jams.
  • The derailleur looks damaged or is close to the spokes.
  • You also notice a loose wheel, damaged frame or unreliable brakes.

You cannot confirm a bike is safe from a noise description alone. Avoid deliberately recreating the fault on a hill or in traffic. If getting the bike to a workshop is difficult, ask about NipNip Collect and Return; the team can confirm coverage and arrangements.

What should you tell the mechanic?

These details help us narrow down the problem without asking you to become a bike technician:

  1. When it happens: pulling away, climbing, after shifting or throughout the ride.
  2. Where it happens: one gear, several gears or all gears.
  3. What you feel: chatter, a clunk, the chain moving sideways or the pedals suddenly dropping.
  4. What changed: a new chain, recent servicing, a knock or a long period in storage.
  5. What you ride: hybrid, road bike, Brompton, e-bike or cargo bike, plus the model if known.

"It skips in my usual commuting gear when I pull away, and the chain was changed last week" is more useful than "the gears are broken". But either is enough to start the conversation.

How much does a bike gear repair cost in London?

Here are relevant published NipNip labour prices, not an estimate of your final bill:

  • Gears adjustment: £19 single / £33 both.
  • Inner gear cable fit: £16 single / £26 both.
  • Outer gear casing fit: £16 single / £26 both.
  • Chain fit: £16, or £22 with a full cover.
  • Cassette fit: £16.
  • Hanger alignment / fit: £16.
  • Drivetrain fit, cassette, chain and crank set: £46.

Parts are extra. Prices may vary by location. These are separate listed jobs, not a promise that every repair costs £19 or that all the jobs need doing together. The bike's condition and the work required determine the cost. Ask the team to confirm the scope and price before proceeding.

A gear adjustment and a replacement drivetrain are different repairs. Paying for an adjustment will not make worn teeth new again; replacing good parts will not solve an unrelated alignment issue.

See the full repair price list for other jobs, or send a booking enquiry describing the slipping.

Do you need a gear repair or a full bike service?

An isolated shifting problem may need an individual repair. If the bike also has tired brakes, rough bearings or a neglected drivetrain, a broader service may be worth discussing.

NipNip's published service options include:

  • Bronze: hub £40, mobile £50, collect £60. Includes a safety check, gear and brake adjustment, wheel and tyre inspection, and a chain check.
  • Silver: hub £80, mobile £90, collect £100. Adds drivetrain removal and deep cleaning, bearing checks and fitting of pads, cables, chain and cassette where needed.
  • Gold: hub £160, mobile £170, collect £180. A more extensive rebuild and refresh, including deeper bearing servicing.

Replacement parts are not included, and prices may vary by location. Included fitting labour does not mean free replacement components. The right service depends on the condition of your bike, not just its age.

Read the service options or ask the team which level suits the symptoms you have noticed.

Brompton gears slipping? Book a specialist check

Brompton gear arrangements vary by model. Some use hub gears, some use external gears, and some combine systems. That means a generic rear-derailleur diagnosis may not fit your folding bike.

Tell us your model and whether the issue affects one gear or several. NipNip is a Brompton Approved Service Centre, with specialist Brompton servicing.

Brompton Complete starts at £100 and Brompton PRO starts at £200, excluding additional parts. An individual fault may need a smaller repair rather than a full overhaul.

A free courtesy Brompton is included with those Brompton services, subject to availability. Mention it when booking so the team can confirm one for you.

Where can you get slipping bike gears checked in London?

Choose the workshop that fits your journey:

  • Borough for a south London workshop option.
  • Tower Bridge for the Shad Thames and Tower Bridge area.
  • Canary Wharf for a Docklands workshop option.
  • Bermondsey for specialist e-bike and cargo-bike enquiries, by appointment.

NipNip also offers mobile servicing and Collect and Return. Ask the team to confirm coverage and whether your repair suits those options.

You can request a free courtesy bike while your bike is being worked on, subject to availability. It is worth mentioning if your bike is your daily transport.

Availability and turnaround depend on the work and parts required. The team will confirm arrangements; this guide does not promise a same-day repair.

Frequently asked questions

Why do my gears slip only when I pedal hard?

Higher effort can expose a problem that is less noticeable while pedalling gently. Worn drivetrain parts are one possibility, but adjustment, alignment and hub problems can also require checking. The symptom alone does not identify the faulty part.

Will oiling the chain fix slipping gears?

Lubrication is part of chain care, but it does not reverse wear or correct a damaged component. Do not assume that a quieter chain means the fault has gone. Repeated skipping needs an inspection.

Do I need a new chain and cassette together?

Not automatically. A mechanic should measure chain wear and inspect the rest of the drivetrain. Replacing only one part may not resolve the fault if other components are worn or incompatible.

Can an e-bike have the same problem?

Yes, e-bikes can have mechanical chain and gear faults too. A loss of drive may also need specialist investigation. Tell us the bike and motor system when enquiring, and do not open the motor or battery yourself.

Can I keep commuting while you repair my bike?

Ask about a free courtesy bike, subject to availability. If you ride a Brompton, specifically ask the team to confirm a courtesy Brompton when arranging specialist servicing.

Get the right repair, not a guess

Slipping gears do not automatically mean an expensive overhaul. They do mean your bike deserves a proper look before the next unexpected clunk.

Tell NipNip what happens, choose your workshop or enquire about collection, and ask about a courtesy bike so your routine does not have to stop with your bike.

Book a bike gear repair assessment with NipNip.

Further reading

For the mechanics of chain wear, see Park Tool's explanation of when to replace a worn chain. For general wet-weather bike care, Cycling UK's winter-ready guide explains the importance of cleaning, tyre pressure and reducing exposure to road salt.

NipNip prices and service inclusions in this guide were checked against our published service information on 5 October 2026. Confirm current pricing and availability with the team when booking.

NipNip mechanic working on a bicycle wheel in the workshop

Need help with your bike? Browse more on the blog, or book a service with our London workshops.

Book a service

New to NipNip?

Get £5 with Promo Code Free£5.

Redeem when dropping off your bike.

Book a service